The large search head of the Viking VK40 allows objects to be detected deeper than with other detectors. The Detector also comes with an impressive 3 modes of detection - Motion, Non-Motion and All-Metal which are stored in the processor memory for easy retrieval via the keypad.
The 3 modes of detection are as follows:
Motion Detection is for discriminating against lower quality targets.
Non-Motion Detection is for accurate pinpointing of objects.
All-Metal Detection which is an automatically retuning Non-Motion mode allowing the smallest signals from the deepest objects to be heard.
* Lightweight 1.4 kgs (3lbs 7oz)
* Waterproof 24 cms (9½ ") Search Head
* Fully Extended Length: 130 cms (4' 3")
* Dismantled Length: 50 cms (1' 7½ ")
* Sturdy 3 Piece Stem
* Motion Detecting
* Non Motion Detecting
* All Metal Mode
* Membrane Keypad
* 16 x 2 Alphanumeric LCD with Target ID
* Flash Memory - Retains Detector Settings
* Discrimination Control
* Sensitivity Control
* Pinpoint Pushbutton
* Beach Mode
* Battery Check
* Built-in Loudspeaker
* Headphone Socket
* Telescopic Shaft
* Concentric Coils
* Up to 15 - 20 Hours use from a Single PP3 Battery
All detectors are covered by a full 24 months guarantee on parts and labour (except for batteries)
This picture is to show the Control / Display panel of the Viking VK40 Metal Detector which shows the following:
* On / Off Key
* Menu Down / Motion Key
* Pinpoint / Retune Key
* Menu Up / All-Metal / Non-Motion Key
* Menu Key
The Search head of a Metal Detector is the single most expensive component of each of the Metal Detectors in our range.
This 24 cms Metal Detector Head Cover fits tightly over the search head to protect it from scratches or getting damaged, caused by hitting stones or other sharp objects whilst detecting. This Metal Detector Head Cover comes in black and is designed to fit our 24 cms Polo search head models.
* Protects search head
* 24 cms diameter
* Black finish
* Removable for cleaning
* Easily replaceable
Fits the following models:
Viking WASP II
Using a Viking Holdall will help with much more than just carrying your Metal Detector. It will stop the Metal detector from getting both scratched and damaged or dirty when not in use.
This Shoulder Carry Holdall will accept any of the Viking range of Metal Detectors when dismantled. The bag has one large compartment to hold the Metal Detector and will also hold many accessories in addition.
* Sturdy Nylon construction
* Shoulder Carrying Strap
* Carrying handle
* Secure Zip Fastening
Headphones are particularly useful when using a Non-Motion Metal Detector. This quality and comfortable pair fully covers the ears, blocking out external noise and allowing even the smallest signal from the Metal Detector to be heard.
* ¼ Stereo Jack plug
* Twin Volume controls
* Padded Earpieces and head strap
* Stereo / Mono Selector switch
DOWNLOAD VK40 METAL DETECTOR USER MANUAL HERE
Opens PDF File (in a separate window). You can then either save the file or print off the instructions.
To enjoy your new Viking VK40 Metal Detector and to get the best use out of it, please take a minute to download and read the Viking VK40 User Manual.
This will enchance your use of the Metal Detector and will make sure that you have hours of fun Treasure Hunting.