Opening Times: Mon - Fri 09:00 - 5:00pm
CALL FREE ON:   0800 246 5801

Your Cart Summary

You have Item(s)

Contact Details

For Outdoors Ltd
Unit 10, Gibbs Marsh Trading Estate
Sturminster Newton
DT10 2RY
United Kingdom
Tel: 01963 361511


VAT No: 821 6384 36

Company Reg No: 05750860

Secured by Sage PayVisaMastercardAmerican Express
PayPal Acceptance Mark
PCI DSS Compliant

Zip Wire Bracket


Outdoor Products | Zip Wire | Zip Wire Equipment |  zip wire bracket

Zip Wire BracketZip Wire BracketZip Wire BracketZip Wire Bracket
Click on an image above to view larger images

Zip Wire Bracket

Choose Delivery Destination:


This hot dipped galvanised steel zip wire bracket has been specially designed for use as the anchor point on the receiving end crossbar for the zip wire cable if you are using a support frame with crossbar.

It has been designed to be used with either roundwood with a diameter of 140-160 mm, or it can be used on any larger wooden crossbar that has a round surface.

The bracket has 3 holes in the curved face, 2 for fixing bolts and 1 for the cable (plain end) to pass through. The end of the cable that has the thimble eye can then be fitted to the bolt that is on the end of the bracket.

Zip Wire Bracket Specfication:

* Material: Hot dipped Galvanised steel
* To fit roundwood of diameter of 140-160 mm
* Designed and TUV tested for Commercial and Domestic use

Please read and take Note:
Fixing bolts for this cable tensioner are NOT included and are something you will need to buy from a good Hardware store. Bolts to be inspected and retighten (if needed) at every inspection

Can't find what you are looking for? Take a look at our dedicated website for zip wires - The Zip Wire Company

Zip Wire FAQ's:

Zip wires are one of our best selling items and will provide many hours of exhilarating fun to all the family - children and adults alike.

For Outdoors understand that you might never of come across something like a zip wire before and that you might have many questions that you would like answered before you purchase one of our zip wire kits. Therefore we have put together a FAQ on zip wires which we hope will answer most of the questions you might have, but if after reading the FAQ you still have any questions, then please do not hesitate to give us a call on 01344 750788 where we will be more than happy to answer them.

You can read OUR ZIP WIRE FAQ's HERE


Please appreciate that while we at For Outdoors are more than happy to help with advice and answer your questions, any advice or guidance given by For Outdoors is for guidance only.

Zip wires (also known as Aerial Runways, Flying Foxes or Tyrolean crossings) can be dangerous if installed incorrectly or on the wrong sort of site and it is therefore strongly advised that the customer, who is buying this equipment, should carry out their own risk assessment of the area/site to be used and must be happy that they are satisfied with this risk assessment.

It is highly recommended that you carry out a safety inspection on completion of the installation of the zip wire equipment and that the equipment should be continually inspected on a regular basis.

Due to the various construction & installation methods used by our customers and which are outside of our control, For Outdoors cannot be held responsible for any problems or injuries that may occur during the installation and subsequent use of any zip wires or zip wire equipment supplied by us if incorrectly fitted.

If in any doubt or you have any questions on anything please call us on:
01344 750788 and we will be happy to advise you.

Share this page: